ioX-Connect wireless control units contain two separate relay switches allowing for individual control through the ioX online sensors portal. The ioX control unit relays can be switched on/off manually through the software or automatically by any wireless sensor notification assigned to a single sensor or group of sensors when a specified condition is detected.
Four LED indicators let the user know if the device is powered on, communicating with the online system and the status of each relay.
The user can manually turn a relay on or off through the ioX-Connect software. Manual changes are either: (a) temporary based on a set duration (ex. activate the relay for 10 minutes then return to the default state); (b) perpetuated indefinitely until overridden.
Each of the units two relays can also be controlled automatically by any wireless sensor or group of sensors. Automatic relay switching can be triggered by setting the control parameters in a sensor notification from the system. The user can set the default state of each relay to on or off and user defined messages from sensors will cause the relay unit to switch to the non-default state. The relay switches back to its default state when the condition is no longer met.
View Relay Control Data Sheet
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Important: ioX-Connect REQUIRES three components; sensors, gateway(s) and the free iox-Connect cloud monitoring solution. You can sign up for your free monitoring solution at any time. Each gateway can handle up to a hundred sensors and there is no limit to the cloud monitoring solution. Additionally, we have advanced software and analytics solutions should you require a more robust solution.
