0-5VDC Interface Voltage Meter (Commercial)

The ioX Wireless Voltage Meter measures the voltage between two electrical points. It can be connected to the power and ground of any voltage source and measure within stated accuracy up to 5 VDC. It can be connected to any kind of variable voltage device, such as a transducer or sensor that outputs voltage. If the device to be measured is passive, the user must supply their own excitation voltage to the device.

• Accurate to ± 3.0% of reading.
• Accurate to ± 0.5% of reading with user calibration
• Interfaces with any variable-voltage device
• 1 mV resolution

View Sensor Data Sheet

In the Box

• Wireless Sensor
• CR2032 - Coin Cell Battery
• Mounting Hardware

WARNING: Use caution when interfacing to the Monnit Wireless Voltage Meter. Negative voltages, AC Voltages, or DC Voltage exceeding 10V. WILL DAMAGE the electronics of the ioX Wireless Sensor. ioX-Connect is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Important: To operate ioX-Connect RF devices, the following components are required:

• RF Sensor(s)
• ioX-Connect RF Gateway(s)
• An active ioX-Connect software subscription, which provides provisioning, dashboards, alerts, and remote monitoring

Each RF gateway supports up to 100 connected sensors.
For organizations requiring deeper insights or enterprise features, advanced analytics and extended software modules are available. Please contact us for details.